無油螺桿鼓風機的維護保養的重點工作有哪些？

無油螺桿鼓風機的維護保養工作，可以讓設備使用年限更久，對產品的生產質量提高也會(huì )起到一定的作用。

The maintenance work of oil-free screw blower can prolong the service life of the equipment and improve the production quality of products.

一、無油螺桿鼓風機進氣消音器的保養與更換要點

1、 Maintenance and replacement of intake muffler of oil free screw blower

1、當顯示器提示或每運行500小時應該進行清潔消音器一次。取下濾芯，使用低壓空氣將塵埃由內向外吹除。

1. When the display indicates or every 500 hours of operation, the muffler should be cleaned. Remove the filter element and use low-pressure air to blow the dust away from the inside out.

2、更換進氣消音器濾芯更換周期為2000小時，環境惡劣時應縮短清潔或更換周期。

2. The replacement cycle of the filter element of the intake muffler is 2000 hours, and the cleaning or replacement cycle should be shortened when the environment is bad.

3、清潔或更換時，嚴防異物掉入主機內，以免主機卡死燒毀。

3. When cleaning or replacing, strictly prevent foreign matters from falling into the host, so as to prevent the host from being stuck and burned.

二、無油螺桿鼓風機油過濾器的更換要點

2、 Key points of oil-free screw blower oil filter replacement

1、新機運行500小時后應該更換油過濾器。

1. The oil filter should be replaced after 500 hours of operation.

2、以后每運行2000小時應更換。

2. It should be replaced every 2000 hours.

3、環境惡劣時應縮短更換周期。

3. When the environment is bad, the replacement period should be shortened.

4、更換應在停機卸壓后進行，更換時借助工具沿逆時針?lè )较蛐鲇蜑V芯，旋出過程防止潤滑油流到機座上，安裝新濾芯時，用手旋緊，更換完成后，應開機檢查是否漏油。

4. Replacement should be carried out after shutdown and pressure relief. During replacement, the oil filter element should be turned out anticlockwise with the help of tools to prevent lubricating oil from flowing to the engine base. When installing a new filter element, tighten it by hand. After replacement, start the machine to check whether there is oil leakage.

三、無油螺桿鼓風機潤滑油的更換要點

3、 Key points of lubricating oil replacement for oil-free screw blower

1、潤滑油質量的好壞對無油螺桿鼓風機的齒輪和軸承壽命影響很大，請使用質量穩定的潤滑油。

1. The quality of lubricating oil has great influence on the gear and bearing life of oil-free screw blower. Please use lubricating oil with stable quality.

2、不同牌號的潤滑油不要混用。

2. Do not mix different brands of lubricating oil.

3、新機運行500小時后應更換潤滑油。

3. The lubricating oil should be changed after the new machine runs for 500 hours.

4、正常使用的無油螺桿鼓風機換油周期為6000-8000小時。

4. The oil change period of normal use oil-free screw blower is 6000-8000 hours.

5、高溫、高濕環境應縮短換油周期。

5. The oil change period should be shortened in high temperature and high humidity environment.

四、無油螺桿鼓風機皮帶維護要點

4、 Key points for belt maintenance of oil-free screw blower

1、皮帶張緊度必須適中，過緊可能引起超載或影響皮帶的使用壽命。過松會(huì )造成皮帶打滑。

1. The belt tension must be moderate, too tight may cause overload or affect the service life of the belt. Too loose can cause the belt to slip.

2、新機運行50小時后首次調整皮帶張緊度；

2. Adjust the belt tension for the first time after the new machine runs for 50 hours;

3、每運行500小時應檢查皮帶或調整皮帶張緊度；

3. Check the belt or adjust the belt tension every 500 hours;

4、皮帶更換周期為4000小時。

4. The belt replacement cycle is 4000 hours.

相關推薦：山東螺桿鼓風機